Your Search returned 66 Results In 0.001 seconds
Foxtam Modular Range - Din Rail, Power Relays, RM8, RM2, RM7

For full specification Click Here
RM Series - A quality range of power relays designed for chassis mounting via mounting tabs, connections via 6.3mm push on terminals. Available in three types; DPCO 16Amp, 3PCO 16Amp, DPCO 25Amp. These relays are ideal for switching large resistive loads such as heating elements and lighting loads when perhaps the use of a contactor would be the normal consideration. The relays have as standard a flag indicator and are CE marked with many international approvals including UL and CSA.
POWER RELAYS
14 Pin 4PCO, TRP, TRP3144, TRP3145, TRP3140, relay

For full specification Click Here

A high quality range of CE marked standard pin out 4PCO 14 pin plug in relays, nominally rated at 5Amps/25OVAC. The relays benefit from both mechanical and electrical indication via a mechanical flag and a high intensity LED. DC coil relays (TRP3140) also have included an internal protection diode fitted across the coil as standard. The relays can be manually tested by a momentary action push button, the same push button can be pulled outwards to give a locking facility. Standard contact material is silver but on request the relays are available with gold flashed contacts for long term assurance of low level signal switching (suffix part number GF). To differentiate between AC and DC coils in the same installation the push button is coloured red for AC coils and blue for DC coils. Coil voltages available are from 6VDC to 240VDC and 6VAC to 240VAC. Clearly marked on the relay case are the connection details, approvals and the CE mark.

14 Pin 4PCO
4PCO TIMERS, Electronic Timers, 14 PIN, 4PCO, DELAY ON TIMER, MULTI TIME RANGE, TB48, PLUG IN

For full specification Click Here

14 pin plug in 4PCO delay on timer, plugging into standard pin out 14 pin sockets. The timers are multi time range via eight selectable time ranges from 1 Sec to 600 hours selectable via dip switches behind a cover on the side of the timer. A dip switch can also change the function from delay on, to flasher mode. A choice of supply voltages are available in both AC and DC. The timers come complete with a red LED that on connection of the supply voltage flashes as timing immediately commences, on the completion of the timing period the output contacts energise and the LED illuminates steady. On removal of the supply voltage the output contacts de-energise and the LED extinguishes.

14 PIN DELAY ON TIMER, MULTI TIME RANGE
BAUSER,170, 171, 180, 181, RECTANGULAR OPERATION COUNTERS, Electromechanical Operation Counters

For full specification Click Here

  • FEATURES

  • Choice of bezel sizes

  • Simple but durable

  • CE marked

  • With & without reset

  • Economical

  • AC & DC voltages

170, 171, 180, 181, RECTANGULAR OPERATION COUNTERS
Electromechanical Hour Run Counters, BAUSER, 200.4, 208, MINATURE HOUR COUNTER

For full specification Click Here

  • FEATURES

  • Miniature size, only 24mm square

  • 22.3mm DIA. cutout

  • Five digits

  • Grey housing

  • Push on terminations

  • CE marked

200.4, 208, MINATURE HOUR COUNTER
Electromechanical Hour Run Counters, BAUSER, 250.2, 260.2, 252.2, 262.2, 604.2, 609.2, HOUR COUNTER, RECTANGULAR

For full specification Click Here

  • FEATURES

  • Standard IP65 front

  • Optional IP65 gasket

  • Ratchet fixing clamp

  • Screw terminals

  • Black front

  • Seven digits


 

250.2, 260.2, 252.2, 262.2, 604.2, 609.2 RECTANGULAR HOUR COUNTERS
Digital Hours and Operation Counters, BAUSER,3800, 3801, 3810 3811, DIGITAL HOUR COUNTER, DIGIATL PULSE COUNTERS

For full specification Click Here

  • FEATURES

  • Choice of bezel size

  • IP65 sealed fronts (without front reset)

  • IP54 sealed fronts (with front reset)

  • Optional IP65 gaskets

  • Choice of reset options

  • Seven digits, 7mm high

  • High shock & vibration resistance

  • High visibility LCD display

  • Screw terminal connection

  • Supplied with retaining clip

3800, 3801, 3810 3811, DIGITAL HOUR & PULSE COUNTERS
Electromechanical Hour Run Counters, BAUSER, 587.10.2, 587.2, DC QUARTZ, 56MM DIA, FRONT BEZEL HOUR COUNTER

For full specification Click Here

  • FEATURES

  • IP65 front

  • 56mm DIA. bezel size

  • Mounting hole DIA. 52mm

  • Seven digits

  • Push on terminations

  • 10-80VDC standard one unit

  • Operation indication

  • Damping rings available

587.10.2, 587.2, DC QUARTZ 56MM DIA. FRONT BEZEL HOUR COUNTER
Electromechanical Hour Run Counters, 610.11, 617.11, RESETABLE HOUR COUNTER, BAUSER

For full specification Click Here

  • FEATURES

  • Black front

  • Metal fixing clamp

  • Pushbutton reset

  • Bezel size 54x29mm

  • Flying lead termination

  • Six digits


 

610.11, 617.11 RESETABLE HOUR COUNTER
Electromechanical Hour Run Counters, ELECTROMECHANICAL HOUR RUN COUNTER 48MM, BAUSER, 632.2, 630.2

For full specification Click Here

  • FEATURES

  • Standard IP65 front

  • Optional IP65 gasket

  • Optional 55mm bezel

  • Optional 72mm bezel

  • Ratchet fixing clamp

  • IP20 screw terminals

  • Black front

  • Operation indication


 

632.2 630.2 ELECTROMECHANICAL HOUR RUN COUNTER 48MM
Electromechanical Hour Run Counters, BAUSER, 656, DC MINIATURE HOUR RUN COUNTER

For full specification Click Here

  • FEATURES

  • Front bezel size 32x15mm

  • Panel or PCB mounting

  • IP65 front

  • DC voltages only

  • Count interrupt input

  • Seven digit

656, DC MINIATURE HOUR RUN COUNTER
661.6, 666.6, DIN RAIL HOUR COUNTER, 	Electromechanical Hour Run Counters

For full specification Click Here

  • FEATURES

  • Din rail mounted

  • Modular construction

  • Seven digits

  • Colour grey RAL7035

661.6, 666.6 DIN RAIL HOUR COUNTER
Electromechanical Operation Counters, BAUSER, 663.6, 668.6, DIN RAIL MOUNTED OPERATION COUNTER

For full specification Click Here

  • FEATURES

  • Din rail mounted

  • Modular construction

  • Seven digits

663.6, 668.6 DIN RAIL MOUNTED OPERATION COUNTER
Digital Hours and Operation Counters, BAUSER,670.6.1.1,670.6.2.1, 670.6.3.1, 670.6.*.2, 670.6.1.2, 670.6.2.2, 670.6.3.2, 672.6 DIN RAIL MOUNTED DIGITAL HOUR & PULSE COUNTERS

For full specification Click Here

  • FEATURES

  • DIN rail mounted

  • Hour counters

  • Pulse counters

  • Combined hour counter & pulse counter

  • IP65 sealed (without reset button)

  • Universal supply 12-150VDC & 24-240VAC

  • Very low power consumption

  • High shock & vibration resistance

  • Seven digits, 5mm high

  • High visibility LCD display

  • IP20 screw terminals

  • Data EEprom stored (25 years)

670.6.*.1, 670.6.*.2, 672.6.*.1.*.2 DIN RAIL MOUNTED DIGITAL HOUR & PULSE COUNTERS
8 Pin DPCO, TRP312, TRP, RELAY

For full specification Click Here

TRP312 Range - A high quality range of CE marked DPCO 8 pin plug in relays in the "14 pin style", nominally rated at 10Amps/250VAC. The relays benefit from every customer required option as standard, namely both mechanical and electrical indication via a mechanical flag and a high intensity LED. DC coil relays (TRP3120) also have included within the relay a protection diode fitted across the coil as standard.

8 Pin DPCO
octal 8 pin dpco, 11 Pin 3PCO, TRP69, MT3, relay, TRP68, 8 PIN DPCO,

For full specification Click Here

A high quality range of CE marked traditional pin out 8 pin DPCO and 11 pin 3PCO plug in relays, nominally rated at 10 Amps/250VAC. The relays benefit from every customer required option as standard, namely both mechanical and electrical indication via a mechanical flag and a high intensity LED. DC coil relays also have included within the relay a protection diode fitted across the coil as standard. The relays can be manually tested by a momentary action push button. Coil voltages available are from 6VDC to 220VDC and 6VAC to 230VAC

8 PIN DPCO TRP 68xx, 11 Pin 3PCO TRP 69xx OCTAL RELAYS
Electromechanical Combined Hours and Operation Counters, combinedcounters, Combined Hour and Operation Counters, 920, COMBINED HOUR & OPERATION COUNTER, HOUR COUNTER, OPERATION COUNTER

For full specification Click Here

  • FEATURES

  • IP65 front

  • Optional IP65 panel gasket

  • Optional 55mm bezel

  • Combined hours & operations

  • Optional 72mm bezel

  • Screw terminals

  • Ratchet fixing clamp

  • Black front

  • Operation indication

  • One set of input connections

920 COMBINED HOUR & OPERATION COUNTER
Accessories, Panel mouting adaptors, Asymmetric Din adaptors, scew terminal Sockets, Free sockets, Panel mounting accessories, Level probes, es8, es 11, a mount, p mount, 8/11 adaptor, s1, s2, s3, ES11, ES8, a-ADAPTOR, P-ADAPTOR, PCS11, PCS8

For full specification Click Here

Accessories, For Y,8 & 11 series and YW,8W & 11W series timers and control relays. Panel mouting adaptors, Asymmetric Din adaptors, Screw terminal Sockects, Free sockets, Panel mounting accessories, Level probes,

Accessories
4PCO TIMERS, Foxtam Classic range Din rail 8/11 pin plug in, Recycling Asymmetrical or Symmetrical, UNI-1d, UNI-4d, UNI 1d, UNI 4d,Asymmetrical, Symmetrical, uni1d, uni4d

For full specification Click Here

An attractive modern designed asymmetrical cyclic timer in a din rail mounted modular style housing. The timer features the facility of double deck terminals thus enabling the timer to be available also in a unique 4PCO version. A selector switch is provided to select eight different time ranges from 1 sec to 100 days independently on both T1 & T2, fine time selection on a selected range is then achieved via the two percentage potentiometers. The timer can be selected to be "pulse first" via an external link fitted between terminals A1 and Y1, leaving the link open results in "pause first". A green supply on LED is featured along with a red LED to indicate relay output status.

Asymmetrical Recycling uni-d (spco) uni-4d (4pco)
Foxtam Classic range Din rail 8/11 pin plug in, Recycling Asymmetrical or Symmetrical, YRD, 8RD, 11RD, 11R2D,Foxtam Classic range Din rail 8/11 pin plug in, Recycling Asymmetrical or Symmetrical, 8rd, 11rd, 11r2d, Asymmetrical, Recycling,

For full specification Click Here

Asymmetrical cyclic output timers available as either dinrail mounted or 8 & 11 pin plug in with a DPCO output version also as an 11 pin. Two selector switches are provided to select one of eight different time ranges from 1 sec to 100 days independently for both T1 & T2, fine time adjustment on a selected range is then achieved via the two percentage potentiometers. The plug in version the time can be selected to be “pulse first” or “pause first” via an external wired link between pins 5 & 6. This is an option available on the din rail version but has to be specified when ordering. The timers feature a bi-colour LED to indicate output relay status, green when timing red when energised. All terminal details along with the CE mark is clearly marked on the sides of the housing.

ASYMMETRICAL RECYCLING YRD DIN RAIL (SPCO), 8RD, 11RD PLUG IN (SPCO), 11R2D PLUG IN (DPCO)
bases and sockets, PYF-14AEW, PYF-14BE, PF-14BE/3, PI-35BE, PI-35BE/3, PF-113BE, PF-083BE, PI-50BE

For full specification Click Here

TYPE: PYF-14AEW - Our most popular 14 pin socket, complete with a fixed marker tab and a screw driver release tab. TYPE: PYF-14BE & PYF-14BE/3 - High sided 14 pin sockets with tunnel clamps. A triple deck version, the PYF-14BE/3 allows segregation of voltages, coil terminals being on one side with two A2 terminals. All changover terminals on the opposite side. TYPE PI-35BE - Fully protected 5 pin relay base. The PI-35BE has rising tunnel style clamps. The PI-35BE is for use with the RTB14 and RTB74 relays. TYPE PI-50BE & PI-50BE/3 - Fully protected 8 pin relay base. The PI-50BE and PI-50BE/3 has rising tunnel style clamps. The PI-50BE/3 is a triple deck base with the coil connection on one side of the base and all the change over terminals on the other side, thus achieving voltage segregation. The PI-50BE and PI-50BE/3 is for use with the RTD14 and RTE24 relays. TYPE PF-083BE (8PIN) & PF-113BE (11PIN) - Fully protected sockets with coil and common terminals at one end and the change overs pairs at the other end side by side, thus enabling very easy wiring changes and corrections. The terminals are rising style tunnel clamps, up to 2 x 2.5mm cables can be accepted. The sockets also have a white marking area. TYPE PYF-08AE - Our 8 pin socket to compliment the TRP3125 relay.

Bases and Sockets
Battery Indicators, 810, 823, 852, 853, 855, 885, 886

For full specification Click Here
 BATTERY LEVEL INDICATORS & CONTROLERS

Battery indicators are gauges for your battery, they exactly indicate the remaning capacity of your battery in battery operated vehicles and therfore prevent a damaging and thus expensive discharge.

On many types an optional relay output is available. On the more sophisticated units a LCD display is included and it is possible to display operation and service times.

A wide choice of bezel sizes and sophistication levels are available and all the various battery voltage are offered. A representative seletion of what is available is depicted below, other styles are also available.
Battery Indicators
Foxtam Classic range Din rail 8/11 pin plug in,Single Shot, yrbf 8rbf, 11rbf, 11r2bf, leading edge,

For full specification Click Here

A dedicated voltage, single time range delay on break timer. Available as either din rail mounting or 8 and 11 pin plug in. These timers are ideal for mass production OEM application, or for any application where operator interference must be kept to a minimum. Time selection is achieved via a percentage potentiometer. The timer is supplied on terminals A1 & A2 and the function is initiated trigger input to the ‘S1’ terminal which energises the relay contacts, the timing commences immediately (leading edge). The contact will then time to de-energise.

delay off with trigger input.(leading edge). yrbf, 8rbf, 11rbf (spco) 11r2bf (dpco)
Foxtam Classic range Din rail 8/11 pin plug in,Single Shot, yrb, 8rb, 11rb, 11r2b, leading edge, YRBS, YRBM, YRBL, 8RBS, 8RBM, 8RML, 11RBS, 11RBM, 11RBL, 112RBS, 11R2BM, 11R2BL

For full specification Click Here

A dedicated voltage, multi time range delay on break timer. Available as either din rail mounting or 8 anf 11 pin plug in. Time selection is achieved via 2 dip switches and by a percentage potentiometer. The timer is supplied on terminals A1 & A2 and the function is initiated trigger input to the �S1� terminal which energises the relay contacts, the timing commences immediately (leading edge). The contact will then time to de-energise.

delay off with trigger input.(leadingedge). yrb, 8rb, 11rb (spco) 11r2b (dpco)
4PCO TIMERS, Foxtam Classic range Din rail 8/11 pin plug in, Delay On Break1, uni-1c, uni-4c, uni 1c, uni- 4c, uni 1c, uni  4c, delay off, trigger, trailing, 4pco, spco, uni1c, uni4c

For full specification Click Here

An Attractive modern designed multi voltage, multi time range delay on break timer. A selector switch is provided to select one of eight different time ranges from 0.1 sec to 10 days, fine time selection on the selected range is achieved via a percentage potentiometer. The timer is supplied on terminals A1 & A2 and the function is initiated trigger input to the �S� terminal which energises the relay contacts, the timing commences after the trigger input is removed (trailing edge). The contact will then time to de-energise.

delay off with trigger input.(trailing edge) UNI-1C (SPCO) UNI-4C (4PCO)
Foxtam Classic range Din rail 8/11 pin plug in,Delay On Break1, delay off, trigger, trailing, yrc, 8rc, 11rc, 11r2c, YRCS, YRCM, YRCL, 8RCS, 8RSM, 8RCL, 11RCS, 11RCM, 11RCL, 11R2CS, 11R2CM, 11R2CL

For full specification Click Here

A dedicated voltage, multi time range delay on break timer. Available as either din rail mounting or 8 anf 11 pin plug in. Time selection is achieved via 2 dip switches and by a percentage potentiometer. The timer is supplied on terminals A1 & A2 and the function is initiated trigger input to the �S1� terminal which energises the relay contacts, the timing commences after the trigger input is removed (trailing edge). The contact will then time to de-energise.

delay off with trigger input.(trailing edge). yrc, 8rc 11rc (spco) 11r2c (dpco)
Foxtam Classic range Din rail 8/11 pin plug in,Delay On Break1, delay off, trigger, trailing, yrcf, 8rcf, 11rcf,  11r2cf,

For full specification Click Here

A dedicated voltage, single time range delay on break timer. Available as either din rail mounting or 8 and 11 pin plug in. These timers are ideal for mass production OEM application, or for any application where operator interference must be kept to a minimum. Time selection is achieved via a percentage potentiometer. The timer is supplied on terminals A1 & A2 and the function is initiated trigger input to the �S1� terminal which energises the relay contacts, the timing commences after the trigger input is removed (trailing edge). The contact will then time to de-energise

delay off with trigger input.(trailing edge). yrcf, 8rcf, 11rcf (spco) 11r2cf (dpco)
 Static Series Timers, Delay on make multi voltage,  YSA, YSAS, YSAM, YSAL, YSAF, YSAP, 8SA, 8SAS, 8SAM, 8SAL, 8SAF, 8SAP, 11SA, 11SAS, 11SAM, 11SAL, 11SAF, 11SAP

For full specification Click Here

Din rail or 8 and 11 pin plug in, series thyristor/triac output delay on timers. Operates on any supply from 20-260VAC/DC and is connected in series with the load. Available in a choice of three multi time ranges, a single time range or a fixed time setting.

delay on make series timer. YSA, 8SA, 11SA
Foxtam Classic range Din rail 8/11 pin plug in, Timers & Time Clocks, Foxtam Classic Range Din Rail, Delay On Make1, UNI-1A, UNI 1A, UNI1A, UNI-4A, UNI 4A, UNI4A, DELAY ON, MULTI VOLTAGE, Foxtam classic Range – Din Rail, 8/11 Pin Plug in, spco, 4pco

For full specification Click Here

An Attractive modern designed multi voltage and multi time range dedicated delay on make timer. Available with either SPCO or 4PCO. The function is initiated by a supply on terminals A1 & A2 which commences the timing, the relay contacts will then energise after the timing period. removal of the supply after the timing period has been completed the relay contacts will de-energise.

DELAY ON TIMER UNI-1A (SPCO) UNI-4A (4PCO)
Foxtam Classic range Din rail plug in, Timers & Time Clocks, Foxtam Classic Range Din Rail, Delay On Make1, DELAY ON, YRA, YRAS, YRAM, YRAL, 8RA, 8RAS, 8RAM, 8RAL, 11RA, 11RAS, 11RAM, 11RAL, 8R2A, 8R2AS, 8R2AM, 8R2AL, 11R2A, 11R2AS, 11R2AM, 11R2AL

For full specification Click Here

A din rail mounted or 8 &11 pin plug in delay on make timer, with dedicated delay on timers. With duel coil voltage and a choice of 3 multi time range. The function is initiated by a supply on terminals A1 & A2 which commences the timing, the relay contacts will then energise after the timing period. removal of the supply after the timing period has been completed the relay contacts will de-energise.

DELAY ON TIMER. YRA, 8RA, 11RA (SPCO) 8R2A, 11R2A (DPCO)
Foxtam Classic range Din rail 8/11 pin plug in, Timers & Time Clocks, Foxtam Classic Range Din Rail, Delay On Make1, DELAY ON, YRAF, 8RAF, 11RAF, YRA F, 8RA F, 11RA F, 8R2AF, 11R2AF, 11R2A F, 8R2A F,

For full specification Click Here

A simple din rail mounted or 8 &11 pin plug in delay on make timer, with dedicated coil voltage and time range. These timers are ideal for mass production OEM application, or for any application where operator interference must be kept to a minimum. The function is initiated by a supply on terminals A1 & A2 which commences the timing, the relay contacts will then energise after the timing period. removal of the supply after the timing period has been completed the relay contacts will de-energise.

DELAY ON TIMER. YRAF, 8RAF, 11RAF (SPCO) 8R2AF, 11R2AF (DPCO)
Foxtam Classic range Din rail 8/11 pin plug in, Time Delay On Make Instantaneous Contact, 11raxf, 8RAXF

For full specification Click Here

Availible with either 8 or 11 pin plug in bases. With a dedicated coil supply and on a single adjustable time range. Delay on make timer with an instantaneous contact.

delay on with instantaneous contact. 8RAXF 11RAXF (1 X SPCO)
Foxtam Classic range Din rail 8/11 pin plug in, Recycling Asymmetrical or Symmetrical, UNI-1EPS, UNI-4EPS, UNI 1EPS, UNI 4EPS,Asymmetrical, Symmetrical, uni1EPS, uni4EPS, EPS, JACUZZI, SPA, Single Shot

For full specification Click Here

The Foxtam Jacuzzi-spa timer is a single shot timer where the relay will energise for a set period time after receiving a trigger input. After this on time has elapsed a separately adjustable inhibit time will start, during this inhibit time it will be impossible the get the relay to reenergise. After the inhibit time has passed the relay will then wait for a new trigger input to start the timing sequence again.


 

DIN RAIL MODULAR MULTI VOLTAGE, MULTI TIME RANGE, JACUZZI-SPA TIMER
miniature PCB relays, INTERFACE RELAYS, MINIATURE, DPCO, HF115FP, TEST BUTTON, FLAG INDICATOR, LED INDICATION

For full specification Click Here

Miniature interface relays suitable for PCB mounting or for plugging into standard 15mm wide Din rail mounted interface relay bases. Whilst being miniature in size they also as standard benefit from user friendly features such as an integral test and locking facility, built in mechanical flag indication and a LED indicator, these features are usually associated with larger relays. Current switching capability is 8 Amps / 250VAC AC1

DPCO MINIATURE INTERFACE RELAYS WITH TEST BUTTON, FLAG & LED INDICATION TYPES HF115FP
4PCO TIMERS, Foxtam Classic range Din rail 8/11 pin plug in,  Recycling Asymmetrical or Symmetrical, SPCO 4PCO multi voltage duty change over relay,  UNI-1B, UNI-4B, UNI 1B, UNI 4B, DUTY CHANGE OVER RELAY, DAILY, WEEKLY, MONTHLY

For full specification Click Here

An attractive modern designed duty changeover relay in a din rail mounted modular style housing of 1.5 modules width (27mm). A selector switch is provided to select one of four different fixed time ranges from 1 day to 1 month, (there is also a 10 second circuit proving setting). This is an ideal simple product to achieve a daily, weekly, fortnightly or monthly duty changeover on pumps, fans and similar equipment especially in the HVAC and pumping industry. A green supply on LED is featured along with a red LED to indicate relay output status.

duty change over relay uni-1b (spco) uni-4b (4pco )
Latching relays, Foxtam Modular Range - Din Rail, UNI-1LR, UNI-2LR, UNI 1LR, UNI 2LR, UNI1LR, UNI2LR. FLIP FLOP, BI-STABLE, NR8000, NR8251, NR8255, NR8256, NR8259

For full specification Click Here

UNI-1LR and UNI-2LR - An attractive modern designed 16 Amp AC1 latching relay in a din rail mounted modular style housing of 1.5 modules width (27mm). The relay features the facility of double deck terminals thus enabling the timer to be available also in both a SPCO and DPCO versions. The latching function is commanded via three different trigger inputs. A green supply on LED is featured along with a red LED to indicate relay output status. All terminal details and information along with the CE mark is clearly marked on the sides of the housing.

electronic latching relays UNI-1LR (SPCO) UNI-2LR (DPCO)
Foxtam Classic range Din rail 8/11 pin plug in, Recycling Asymmetrical or Symmetrical, engine start relay, 11r2es,

For full specification Click Here

An 11 pin plug in engine start attempt relay for use in starting combustion engines connected to generators. The number of start attempts is selected by the middle selector switch 1-8. The start time is set by the top potentiometer between 3-30 sees and the recovery time by the bottom potentiometer between 6-60 sees. When the auxiliary supply (9-30VDC) is first applied (+2 & -10) the "Start" relay energises immediately for the "Start" time. After expiration of the "Start" time the relay de-energises for the "Recovery" time. This cycle continues for 1-8 times as set by the number on the "Attempts" switch. If the engine starts the power supply to terminals 2 & 10 should be thus wired so that it is interrupted. The "Alarm" relay will energise after the last start attempt thus an "engine fail to start alarm", this status will remain until the auxiliary supply is removed.

engine start relay 11r2es
Foxtam Classic range Din rail 8/11 pin plug in, Flasher, yrdb, 8rbd, 11rdb, 8r2db, 11r2db

For full specification Click Here

Din rail mounted or 8 & 11 pin plug in SPCO with a DPCO option on plug in units dedicated flasher relays, with dedicated coil voltages. The flashers are available as a standard fixed 1 sec On and 1 sec Off cycle ("DB" version) or with an adjustable cycle time, a set cycle time equates to "50% On & 50% Off". The relays can also on request, subject to a minimum quantity of 10 pieces, be factory set with any fixed cycle time, thus ensuring absolutely no operator interference. The timers feature a red LED to indicate relay output status. On connection of the supply voltage the relay contact/s immediately energise (pulse start) and remain energised for 50% of the cycle time, followed by a de-energisation for the next 50% of the cycle time. If the supply voltage is removed at any point, any remaining elapsed time is cancelled and if the relay contact/s are energised they will de-energise immediately

flasher relays yrbd(f) 8rdb(f) 11rdb(f) (spco) 8r2db(f) 11r2db(f) (dpco)
 Static Series Timers, Flasher multi voltage,  YSDFPT, 8sdfpt, 11sdfpt, 8sdb, 11sdb, 8sdfpt, 11sdfpt Flasher, ysdb

For full specification Click Here

Din rail mounted or 8 & 11 pin plug in solid state output electronic flashers, available in either Triac output for AC circuits, or as a Transitor output for DC circuits. These devices are most suitable for applications where there is a prolonged flash rate and relay wear is of a concern. All terminal details with the CE mark is clearly marked on the sides of the housing. The AC Triac version is a "pause start" and of a fixed 1 sec cycle (0.5 sec Off & 0.5 sec On). The DC Transitor version is also a "pause start" and is available with a choice of adjustable cycle times. A set cycle time equates to 50% of the time as On and 50% of the time as Off. If the supply voltage is removed at any point, any remaining elapsed time is cancelled and if the output is On it will immediately switch to Off

FLASHERS ysdb 8sdb 11sdb (triac output) ysdfpt 8sdfpt 11sdfpt
Foxtam Classic range Din rail 8/11 pin plug in, Timers & Time Clocks,  8/11 pin plug in,Fleeting Contact Relay , YRX, 11RX, 8RX, 11R2X, 8R2X,

For full specification Click Here

Simple din rail mounted or 8 and 11 pin plug in fleeting contact relay, available SPCO and with a DPCO option on 8 and 11 pin plug in units. The units have 4 selectable modes of operation changed via a dip switch on the top of the relay, the time of the fleeting contact is fixed at 0.5 sec. the 4 modes of operation are:- 1, Pulse on connection of supply. 2, Pulse on removal of the supply. 3, Pulse on both connection and removal of the coil supply. 4, Unit disabled.

fleeting contact relay YRX, 11RX, 8RX (spco) 11R2X, 8R2X (dpco)
14 Pin 4PCO,FRP, FRP3145, 3145, 14 PIN, 4PCO,

For full specification Click Here

A high quality range of CE marked standard pin out 4PCO 14 pin plug in relays, nominally rated at 5Amps/250VAC AC1. The relays benefit from every customer required option as standard, namely both mechanical and electrical indication via a mechanical flag and a high intensity LED. DC coil relays also have included within the relay a protection diode fitted across the coil as standard.

FOXTAM 14 PIN 4PCO, 5 AMP RATED RELAY. FRP3145
8 Pin DPCO, frp3225, frp, foxtam

For full specification Click Here
A high quality range of CE marked DPCO 8 pin plug in relays in the "14 pin style", nominally rated at 10Amps/250VAC. The relays benefit from every customer required option as standard, namely both mechanical and electrical indication via a mechanical flag and a high intensity LED. DC coil relays (TRP3120) also have included within the relay a protection diode fitted across the coil as standard.
The relays can be manually tested by a momentary action push button, the same push button can be pulled outwards to give a locking facility. Standard contact material is silver but on request the relays are available with gold flashed contacts for long term assurance of low level signal switching (suffix part number GF). To differentiate between AC and DC coils in the same installation the push button is coloured red for AC coils and blue for DC coils. Coil voltages available are from 6VDC to 240VDC and 6VAC to 240VAC. Clearly marked on the relay case are the connection details, approvals and the CE mark.
foxtam 8 pin dpco, 10 amp rated relay. FRP3125
Panel Mounted Timers - 48mm, panel mounted DIN 48, timers, AH5N,

For full specification Click Here

A Din standard 48mm front panel mounted electronic timer. The AH5N is multi time range from 1sec to 600 hours, time range setting is facilitated by removing the large front plastic potentiometer time setting knob and using the two small thumbwheel switches at the bottom of the scale plate the range can be set. The timer is also multi voltage 24-240VAC/DC. The AH5N has 2 x SPCO contacts both rated at 5 Amps. The AH5N can be used for either delay on or delay off applications, depending on what side the output contacts are wired. A mode switch (mode A or B), mode A will facilitate two timed contacts and mode B one timed and one instant contact. The AH5N is ideal for many process control applications where the set time needs to be easily adjusted by an operator.

FRONT PANEL MOUNTED ANALOGUE PROCESS TIMER
Panel Mounted Timers - 48mm, DIGITAL PROCESS TIMER, 48MM, FRONT PANEL, AH4CN-RG

For full specification Click Here

A Din standard 48mm front panel mounted digital electronic timer. The AH4CN-RG is multi time range from 0.01sec to 9990 hours, the time setting along with the time range is set via thumbwheel switches on the front of the timer, facilitating the setting of very accurate and precise times. The timer is multi voltage, a low voltage version 12-48VAC/DC and a high voltage version 100-240VAC/DC. The AH4CN-RG has a SPCO output contact rated at 5 Amps.

FRONT PANEL MOUNTED DIGITAL PROCESS TIMER
Static Series Timers, Interval timer multi voltage, interval, YSH, 8SH, 11SH, YSHS, YSHM, YSHL, YSHF, 8SHS, 8SHM, 8SHL, 8SHF, 11SHS, 11SHM, 11SHL, 11SHF, YSHP, 8SHP, 11SHP

For full specification Click Here

Din rail or 8 and 11 pin plug in, series thyristor/triac output interval (delay off) timers. Operates on any supply from 20-260VAC/DC and is connected in series with the load. Available in a choice of three multi time ranges, a single time range or a fixed time setting.

interval series timers. YSH 8SH 11SH
Foxtam Classic range Din rail 8/11 pin plug in, Timers & Time Clocks, Interval1, rh, r2h, YRH, YRHS, YRHM, YRHL, 8RH, 8RHS, 8RHM, 8RHL, 11RH, 11RHS, 11RHM, 11RHL, 8R2H, 8R2HS, 8R2HM, 8R2HL, 11R2H, 11R2HS, 11R2HM, 11R2HL

For full specification Click Here

Din rail mounted or 8 &11 pin plug in dedicated interval timer, with duel coil voltage(SPCO only), along with a choice of three multi time ranges.

interval timers. YRH 8RH 11RH (SPCO) 8R2H 11R2H (DPCO)
Foxtam Classic range Din rail 8/11 pin plug in, Timers & Time Clocks, Interval1, RH.F, RHF, RH F, 2HF, 2H F, 2H.F, INTERVAL, yrhf, yrh.f, 8rhf, 8rh.f. 11rhf, 11rhf, 8r2hf, 11r2hf

For full specification Click Here

A simple din rail mounted or 8 &11 pin plug in interval timer (delay to de-energise), with dedicated coil voltage and time range. These timers are ideal for mass production OEM application, or for any application where operator interference must be kept to a minimum.

interval timers. YRH.F 8RH.F 11RH.F (SPCO) 8R2H.F 11R2H.F (DPCO)
Foxtam Classic range Din rail 8/11 pin plug in, Mains Restoration Auto Restart, L8RAFTU, L11RAFTU, LYRHFTU, L8RHFTU, L11RHFTU LYRQFTU, L8RQFTU, L11RQFTU, brown out timers,  lyraftu, lyra, lyraf, l8r2aftu, l11r2aftu, lyrhftu, l8r2hftu, l11r2hftu, l8r2qftu,

For full specification Click Here

Din rail mounted or 8 & 11 pin plug in SPCO and DPCO "mains restoration auto restart timers". The voltage and supply sensing built into these units are designed to sense voltage dips and momentary loss of supply referred to as "Brown Outs". This phenomena is a particular threat in the water industry and regularly occurs at remote pumping locations, especially during electrical storms. Left unchecked, a supply dip can "lock out" all or part of a control system, causing system malfunctions over a wide area necessitating engineers site visits, just to reset and restart a control system. By monitoring the supply these tried and proven Foxtam units will provide the "auto restart" signal to reset and restart the control system without the need for a site visit. For added convenience DPCO units are also available with the extra contact used as say a telemetry output to notify an operations centre that an incident has occurred. These timers are designed and operate in such a way that they reset as quick, if not quicker, than standard contactor and relay coils. They are offered in a choice of three functions: Delay on A function, Pulse H function and Delayed pulse Q function. 1mSec version also available on request.

MAINS RESTORATION 20msec LYRAFTU, L8RAFTU, L11RAFTU, LYRHFTU, L8RHFTU, L11RHFTU, LYRQFTU, L8RQFTU, L11RQFTU
Electronic Timers, Mechanical Extension Timers & Time Clocks, 136, 136.2, 136.2.1, 134

For full specification Click Here

Mechanical plant extension timers, also known as “override timers” or “caretaker timers”. Totally mechanically driven by a clockwork spring, therefore no auxiliary supply is required. The moment the setting knob is turned passed zero to the set time required, the output contact/s switch, the timer will then start running back to zero. When zero is reached the output contact/s will switch back. If after the initial time has been set, it is required that the set time, or remaining time needs to be lengthened, shortened or cancelled back to zero, the knob can be turned without harming the mechanical mechanism. The timers benefit from 16 Amp / 250V contacts and is easily fitted to the front of a control panel via screw fixings.

MECHANICAL PLANT EXTENSION TIMERS
Timeclocks, programmable, time, switch, time switch, Timeclocks, Mechanical Time Clocks, mechanical time, alpha, QRS, QRD, Time clocks, UNO

For full specification Click Here

Electro mechanical peg type time clocks. The ALPHA range is suitable for Din rail mounting, front panel mounting or surface mounting, when front panel mounted the front bezel size is a standard Din 72mm (panel cut out 68mm square). The UNO range is a slimline 17.5mm wide (single module) Din rail mounted unit. Both the ALPHA and UNO are available either as a daily time clock or weekly time clock. On the daily time clocks each setting peg equals 15 mins and on weekly time clocks each setting peg equals 2 hours. Both the ALPHA and UNO time clocks feature captive time setting pegs, an override switch designated ON / OFF / AUTO. The ALPHA range has a SPCO output, whilst the UNO range is a 1NO contact, in both types the contact rating is 16 Amps / 250V with a quartz movement and a battery reserve. A wide choice of both AC and DC supply voltages are available.

Mechanical Time Clocks
JAY, MIDLAND, GBP, Mains Restoration Auto Restart,

For full specification Click Here

Din rail mounted SPCO “mains restoration auto restart timers”. The voltage and supply sensing built into these units are designed to sense voltage dips and momentary loss of supply referred to as “Brown Outs”. This phenomena is a particular threat in the water industry and regularly occurs at remote pumping locations, especially during electrical storms. Left unchecked, a supply dip can “lock out” all or part of a control system, causing system malfunctions over a wide area necessitating engineer’s site visits, just to reset and restart a control system. By monitoring the supply these tried and proven units will provide the “auto restart” signal to reset and restart the control system without the need for a site visit.

MIDLAND JAY BROWNOUT TIMERS GBPXXXX
Foxtam Modular Range - Din Rail, Power Relays, UNI-1R, UNI-3R, UNI1R, UNI3R, UNI 1R, UNI 3R

For full specification Click Here

UNI-1R and UNI-3R - An attractive modern designed 16 Amp AC1 power relay in a din rail mounted modular style housing of 1.5 modules width (27mm). The relay features the facility of double deck terminals thus enabling the relay to be available also in both a SPCO and 3PCO versions. Coil voltage is determined via the connection to different terminals. LEDs are fitted to indicate relay output status. All terminal details and information along with the CE mark is clearly marked on the sides of the housing.

MODULAR POWER RELAYS UNI-1R (SPCO), UNI-3R (3PCO)
4PCO TIMERS, Foxtam Classic range Din rail 8/11 pin plug in, Multi Voltage, Spco dpco 4pco multi function multi voltage multi time range, SPCO,DPCO & 4PCO Multi Function, Multi, DIN, uni-1m, uni-4M, uni1m, uni4m, uni 1m, uni 4m,

For full specification Click Here

An Attractive modern designed multi voltage, multi time range and multi function Din rail timer. Available with either SPCO or 4PCO. A selector switch is provided to select eight different time ranges from 0.1 sc to 10 days, fine time selection on the selected range is achieved via a percentage potentiometer. A further selector switch used to select one of eight different functions. FUNCTIONS:- Delay on (A). Interval (H). Delay off with trigger trailing edge (C). Single shot/Delay off with trigger leading edge (B). Delayed pulse (Q). Flasher pause first (D). Flasher pulse first (D/I). Latching (I).

MULTI TIMERS UNI-1M (SPCO) UNI-4M (4PCO)
Foxtam Classic range Din rail 8/11 pin plug in, Multi Voltage, Spco dpco 4pco multi function multi voltage multi time range, SPCO,DPCO & 4PCO Multi Function, Multi, DIN, UNI-8, UNI-11, UNI 8, UNI 11

For full specification Click Here

An Attractive designed multi voltage, multi time range and multi function. Plug in timer. Available with either SPCO or DPCO. A selector switch is provided to select eight different time ranges from 0.1 sc to 10 days, fine time selection on the selected range is achieved via a percentage potentiometer. A further selector switch used to select one of eight different functions. FUNCTIONS: Delay on (A). Interval (H). Delay off with trigger trailing edge (C). Single shot/Delay off with trigger leading edge (B). Delayed pulse (Q). Flasher pause first (D). Flasher pulse first (D/I). Latching.

MULTI TIMERS UNI-81M, UNI-11-1M (SPCO). UNI-11-2M (DPCO)
4PCO TIMERS, Foxtam Classic range Din rail 8/11 pin plug in, Time Delay On Make Instantaneous Contact, uni-2x, uni 2x, uni2x, uni-4x, uni4x uni 4x,

For full specification Click Here

An Attractive modern designed multi voltage and multi time range dedicated delay on make timer with an instantaneous contact. Available with either 2 x SPCO or 2 x DPCO. The function is initiated by a supply on terminals A1 & A2 which immediatlet energises the instant contact(s) and commences the timing, the relay contacts will then energise after the timing period.

Multi voltage multi time range, on delay with instantaneous contact. uni-2x(spco) uni-4x (dpco)
Latching relays, Foxtam Classic range Din rail 8/11 pin plug in, UNI-4LRS,UNI4LRS. UNI4LRS

For full specification Click Here

A din rail mounted tri-voltage modular latching / sequence relay with a selectable memory option. Outputs are four individual single pole normally open contacts. The unit is programmed via three front selector switches. Switch 1 determines the number of relays in play, switch 2 the function of the latching / sequencing of the relays, switch 3 selects if the memory function is required. The unit requires a permanent supply to the coil and operation is then achieved by using up to three volt free trigger commands from A1 onto terminals FWD, BCK or RESET. The unit reacts to the leading edge of a trigger input only. If required the trigger input can then be held continuously, if then a leading edge is then seen on any of the other inputs the unit will operate accordingly. A trigger to FWD will cause the unit to switch the relays in a forward manner, whilst a trigger to BCK will cause the unit to step back a position. A RESET trigger will cause the unit to reset back to the first (start) position.

PROGRAMMABLE LATCHING, SEQUENCE & MEMORY RELAY UNI-4LRS (4 x spno)
Programmable Time Switch, programmable, time, switch, time switch, SC44, sc48, SC28, sc78, sC98,

For full specification Click Here

Digital time clocks in either single or double channel, Din rail mounted or front panel mounted. The Din rail mounted units are 2 modules wide 35mm, whilst the front panel mounted units have a front bezel size of 72mm fitting into a 68mm square cut out. All types facilitate very accurate to the minute and if the pulse function is used, to the second switching accuracy. 46 switching instructions are possible, but via using block programming on days, a common instruction on more than one day counts as only one instruction.

Programmable Time Switch
Electromechanical Hour Run Counters, BAUSER,R572, R577, R596, R597, GLASS CASED HOUR COUNTERS

For full specification Click Here

  • FEATURES

  • DIN 72mm or DIN 96mm

  • Instrument case style

  • Seven digits

  • Optional reset versions

  • Metal fixing clamp

  • With operation indication

R572, R577, R596, R597, GLASS CASED HOUR COUNTERS
Foxtam Classic range Din rail 8/11 pin plug in, Multi Voltage, Spco dpco 4pco multi function multi voltage multi time range, SPCO, SLIMLINE, MINI1M, MINI-1M, MINI 1M, MINI, slim line,

For full specification Click Here

An attractive modern designed multi “everything” timer in a din rail mounted modular style housing of 1 module width (18mm). The timer features large double deck terminals suitable for up to 4mm2 cable. A selector switch is provided to select one of seven different time ranges from 0.1 sec to 100 hours, fine time selection on a selected range is then achieved via a percentage potentiometer. A further selector switch is then used to select one of ten different functions. A green supply on LED is featured along with a yellow LED to indicate relay output status. The green supply LED flashes to indicate timing. 

SLIM LINE MULTI TIMER MINI- 1M
miniature PCB relays, INTERFACE RELAYS, MINIATURE, SPCO, DPCO, HF115F1, HF115F2

For full specification Click Here

Miniature interface relays available either as SPCO or DPCO suitable for PCB mounting or for plugging into standard 15mm wide Din rail mounted interface relay bases. The relays are compact in construction being of low profile and fully sealed. The PCB pins are strong and are therefore hard to bend when inserted into a socket. Small in size but the switching capacity is large, the SPCO is rated at 12 Amps / 250VAC AC1 and the DPCO version is rated at 8 Amps / 250VAC AC1. For ease of identifying AC circuits against DC circuits in a control panel, AC coil relays are white and DC coil relays are black.

SPCO & DPCO MINIATURE INTERFACE RELAYS TYPES HF115F1 & HF115F2
miniature PCB relays, trend low coil consumption relays, INTERFACE RELAYS, MINIATURE, SPCO, HF115FH, LOW POWER CONSUMPTION

For full specification Click Here

Miniature interface relays available as SPCO and only with DC coils. The HF115FH is a special sensitive coil version of the HF115F1, the HF115FH has a much higher coil resistance and hence a lower coil consumption of 250mW. This makes the HF115FH relay ideally suited for converting BMS and PLC, 0-10VDC analogue signals to digital inputs when there is only limited power behind the signal. In particular the HF115FH is fully compatible with the 0-10VDC output from “Trend Building Management Systems”, the 12VDC coil relay will pull in at 9VDC.

SPCO MINIATURE LOW COIL CONSUMPTION BMS INTERFACE RELAY TYPE HF115FH
4PCO TIMERS, Foxtam Classic range Din rail 8/11 pin plug in, Star Delta1, uni-2q, uni2q, uni 2q, uni-4q, uni4q, uni 4q, star delta,

For full specification Click Here

An Attractive modern designed multi voltage, multi time range star delta timer. A selector switch is provided to select four different ‘star’ time ranges from 0.1 sc to 10 mins, fine time selection on the selected range is achieved via a percentage potentiometer. On connection of the supply voltage the "Star" contact remains closed and timing immediately commences, after the expiry of the set delay time the "Star" contact opens. There then follows a dwell time of 100mSec (on request 30mSec) and the separate "Delta" contact then closes

star delta. uni-2q (2 x spco) uni-4q (2 x dpco)
Foxtam Classic range Din rail 8/11 pin plug in, Star Delta1, yr2q, 8r2q, 11r2q, star, delta,

For full specification Click Here

Din rail mounted or 8 & 11 pin plug in star delta timers, dedicated coil voltage and dedicated adjustable time range. The timers have two independent contact outputs, one designed as Star and one as Delta. The timers are with a single adjustable time range and feature a red LED to indicate completion of the "Star" time. On connection of the supply voltage the "Star" contact remains closed and timing immediately commences, after the expiry of the set delay time the "Star" contact opens. There then follows a dwell time of 100mSec (on request 30mSec) and the separate "Delta" contact then closes

star delta. yr2q 8r2q 11r2q
Foxtam Classic range Din rail 8/11 pin plug in,True Delay On Break, uni-1k, uni1k, uni 1k, uni-2k, uni2k, uni 2k,

For full specification Click Here

An Attractive modern designed true delay off timer. Multi voltage, multi time range up to 30 MINS! The units supply voltage is selectable by an input to 1 of 3 different terminals. The relay(s) will energise immediately the supply voltage is applied. When the supply voltage is removed the relay is held energised until the timing period has elapsed and the relay(s) will de-energise.

true delay on break. multi voltage multi time range. UNI-1K (spco) UNI-2K (dpco)
Foxtam Classic range Din rail 8/11 pin plug in,True Delay On Break, yrk.f, 8rk.f, 11rk.f,yrkf, 8rkf, 11rkf, 8r2k.f, 11r2k.f,8r2kf, 11r2kf

For full specification Click Here

A simple true delay off timer. Single voltage, single adjustable time range. Up to 20 mins. These timers are ideal for mass production OEM application, or for any application where operator interference must be kept to a minimum. The relay(s) will energise immediately the supply voltage is applied. When the supply voltage is removed the relay is held energised until the timing period has elapsed and the relay(s) will de-energise.

true delay on break. yrk.f 8rk.f 11rk.f (spco) 8r2k.f 11r2k.f(dpco)
Foxtam Classic range Din rail 8/11 pin plug in,True Delay On Break, yrk.m, 8rk.m, 11rk.f,yrkm, 8rkm, 11rkm, 8r2k.m, 11r2k.m,8r2km, 11r2km

For full specification Click Here

A din rail mounted or 8 &11 pin plug true delay off timer. Single voltage and Multi time range. The relay(s) will energise immediately the supply voltage is applied. When the supply voltage is removed the relay is held energised until the timing period has elapsed and the relay(s) will de-energise.

true delay on break. yrk.m 8rk.m 11rk.m (spco) 8r2k.m 11r2k.m(dpco)