DIN 96x48mm 5 DIGIT MICROPROCESSOR METER WITH RELAY OUTPUTS, ANALOGUE SIGNAL OUTPUT, RS485

Product

group

DD

CS1, CS2

Features

  • Measuring DCA, DCV, ACA, ACV, Hz
  • Analogue signal inputs
  • Hz & pulse rate inputs
  • Thermocouple & PT100 inputs
  • Strain gauge inputs
  • Potentiometer & resistance inputs
  • High accuracy, stability & resolution
  • Choice of relay, analogue signal or RS485 outputs
  • Optional excitation supply available
  • Special scaling
  • CE marked
Download data sheet

Din 96x48mm 5 digit digital panel meters, available with a wide choice of both DC and AC inputs, along with many process inputs. The meter can be specified with a choice of one of three outputs, one relay (non adjustable from the front) can be specified as latched or non latched, an isolated analogue output or RS485 MODBUS RTU. The meter utilises the latest microprocessor technology in both the setting and operation of the meter.

Programming & set up buttons can be specified with “Visible Buttons” on the front panel or “Discrete Buttons” behind the front screen. If not specified, meter will be supplied with “Discrete Buttons”

Relay programmable:
Low
High
Low (latched)
High (latched)

Number of setpoints: 1

Energisation functions:
Start delay
Energisation & de-energisation delay
Energisation latching
Hysteresis

Time delay adjustable: 0-9 mins 59.9 secs

Relay contact: SPDT 5A/230VAC, 10A/115VAC

Accuracy: ≤±0.1%of FS

Ripple: ≤±0.1% of FS

Response time: ≤100mSec (10-90% of input)

Output capability:
≥Voltage 1000 Ohm
Current into 600 Ohm max

Protocol: MODBUS RTU

Baud rate programmable: 1200 / 2400 / 4800 / 9600 / 19200 / 38400

Data bits: 8 bits

Parity programmable: Even, odd or none (with 1 or 2 stop bit)

Address programmable: 1-255

Distance: 1200 Metres

Terminal resistor: 150 Ohm at last unit

Measuring accuracy (VAA): ≤±0.1% FS ±1digit

Measuring accuracy (VAT): ≤±0.1% FS ±1digit

Measuring accuracy (VAD): ≤±0.04% FS ±1digit

Measuring accuracy (F): ≤±0.005% FS ±1digit

Measuring accuracy (SG): ≤±0.04% FS ±1digit

Measuring accuracy (PM): ≤±0.04% FS ±1digit

Measuring accuracy (RS): ≤±0.04% FS ±1digit

Measuring accuracy (T):
PT100:≤±0.1% FS ±1digit
Thermocouple: ≤±0.2% FS ±1digit

Measuring accuracy(RL): ≤±0.005% FS ±1digit

Sampling rate: 15 cycles / sec

Response time: ≤100mSec

Display: 20mm high red LEDs

Display range:
-19999 to 29999
(CS1-RL 0.0000 to 99999)

Decimal point: At any point or not at all

Over-range indication: “ovFL" displayed when input is over 120% of input range

Under-range indication: “-ovFL" displayed when input is under -20% of input range

Aux supply:
115/230 VAC ±15%, 50/60Hz
ADL: 20-56V AC/DC
ADH: 85-264VAC & 100-300VDC

Power consumption: 4.5 - 5VA

Excitation max current: 30mA

Operating temperature: 0-60°C

Operating relative humidity: 20-95% RH

Temperature coefficient: ≤100PPM / °C

Storage temperature: -10°C to +70°C

Dielectric strength: AC 2.0KV for 1 min between input, output/s power and case

Protection: IP54

CS1-MEASUREMENT.png#asset:4151

The meter will be scaled exactly to your requirements

CS1-Ordering-infomation3.png#asset:4258

Programming & set up buttons can be specified with “Visible Buttons” on the front panel or “Discrete Buttons” behind the front screen. If not specified, meter will be supplied with “Discrete Buttons”.

CS1-FRONT-PANEL.png#asset:4148

CS1-INSTALLATION1.png#asset:4155

CS1-DIMENSIONS.png#asset:4147

For input voltages of between 1000V & 4000V either AC or DC an external “High Voltage Module” PCB must be used. The module has two voltage taps of 0-2000V & 0-4000V

CS1-HIGH-VOLTAGE-MODULE.png#asset:4149

CS1-CS1-PR-CONNECTION-DIAGRAM.png#asset:4141

CS1-CS1-VA-CONNECTION-DIAGRAM.png#asset:4146

CS1-CS1-F-CONNECTION-DIAGRAM.png#asset:4139

CS1-CS1-SG-CONNECTION-DIAGRAM.png#asset:4144

CS1-CS1-RL-CONNECTION-DIAGRAM1.png#asset:4154

CS1-CS1-PM-CONNECTION-DIAGRAM.png#asset:4140

CS1-CS1-RS-CONNECTION-DIAGRAM.png#asset:4143

CS1-CS1-T-CONNECTION-DIAGRAM.png#asset:4145

Recently Viewed Products

Keep Updated

Receive updates about our offers, latests products and more, directly to your inbox