Your Search returned 19 Results In 0.002 seconds
4 Digit Microprocessor Display Meter, CM2, THERMOCOUPLE INPUTS, PT100 INPUTS, PT1000 INPUTS

For full specification Click Here

Din 96x48mm 4 digit panel meters, available with a wide choice of AC & DC voltage and current inputs, including DC analogue signal inputs, thermocouple inputs and PT100, PT1000 inputs. The meters are can be programmed by four tactile switches that can be specified to be accessed directly on the front panel or specified as discrete, where the buttons are hidden behind the front screen. These meters are display only meters and have no outputs, for meters with outputs please see meter range CS1.

CM2
Display Meter with Relay and Signal Outputs, Cs1, CS2, digital display, microprocessor

For full specification Click Here

5 digit microprocessor meter with relay outputs, analogue signal output, RS485 Din 96x48mm 5 digit digital panel meters, available with a wide choice of both DC and AC inputs, along with many process inputs. The meter can be specified with a choice of one of three outputs, one relay (non adjustable from the front) can be specified as latched or non latched, an isolated analogue output or RS485 MODBUS RTU. The meter utilises the latest microprocessor technology in both the setting and operation of the meter.


CS1 meters are for single or no outputs. The meter becomes CS2 prefixed, when multiple outputs are specified. 

CS1 & CS2
DC Ampere Hour Meter with Relay and Signal Outputs, digital display, CS2, CS2-tM

For full specification Click Here

DC Ampere hour meter with relay outputs, analogue output, RS485 A Din 96x48mm DC Ampere Hour meter, taking a current reference from a DC shunt and integrating this reference against time to achieve an Ampere Hour or Ampere Minute reading. There are two display screens, the main ten digit screen is the totaliser display, the other screen is a "Batch" programmable setting. The meter can be specified with up to four relay outputs (2C/O and 2N/O) which can be assigned at the time of ordering for many functions to control say an electroplating system. As an option RS485 MODBUS is also available. Three volt free control inputs are featured as standard for functions such as reset.

CS2-TM
Miniature 48x24mm 3.5 Digit Microprocessor Display Meter with Relay and Signal Outputs, CS3, Display Meter with Relay Outputs

For full specification Click Here

Miniature Din 48x24mm 5 digit panel meters, available with a wide choice of DC analogue voltage and current signal inputs, along with potentiometer and resistance inputs. These meters can be specified with one or two relay outputs, plus if required an analogue output or RS485 MODBUS RTU. An excitation supply of 24VDC max 30mA is featured as standard on the CS3-PR version. These meters utilise the latest microprocessor technology in both the setting and operation of the meter.

CS3
Miniature 48x24mm 3.5 Digit Microprocessor Display Meter, CS3

For full specification Click Here

Din 48x24mm 4 digit microprocessor based digital panel meters, available with a wide choice of both AC and DC voltage or current inputs including standard and non standard analogue signal inputs. PT100 temperature inputs can also be specified. The meters are can be programmed by four tactile switches that can be specified to be accessed directly on the front panel or specified as discrete, where the buttons are hidden behind the front screen. These meters are display only meters and have no outputs.

CS3S
Panel Meter for display of Amp Volt and Frequency, 3.5 Digit 0-1999 display, csm321, csm-321, digital display

For full specification Click Here

3� Digit panel meter  Measuring DCA, DCV, ACA, ACV, Hz  Accuracy DC: �0.1%, AC: �0.2%  3� Digital display : 1999  Peak Hold function (option)  Easy to wire, screw type terminal  DIN standard 96x48mm  High stability & low cost

CSM-321
Panel Meter for display of Amp Volt and Frequency, CSM421, CSM-421, 0-19999 display,

For full specification Click Here
4½ Digit panel meter

 Measuring DCA, DCV, ACA, ACV, Hz
 Accuracy DC: ±0.04%, AC: ±0.1%
 4½ Digital display: 19999
 Easy to wire, screw type terminal
 1/8 DIN standard (96x48mm)
 High stability & low cost
CSM-421
Miniature 48x24mm 3.5 Digit Display Meter, CSMS, CSMS321, CSMS-321, digital display

For full specification Click Here

Din 48x24mm 3� digit panel meter  Measuring DCA, DCV, ACA, ACV, Temperature  Accuracy �0.1% DC: �0.25% AC  0.2% (Pt100): �1% (K, J Thermocouple)  3� Digital display : 1999  1/32 DIN (48 x 24mm)  High stability & low cost

CSMS-321
Process Meter for display of mA mV VDC and Potentiometer Signals, 3.5 Digit 0-1999 display, CSR321, CSR-321, digital display

For full specification Click Here

3� Digit process meter  Measuring Process Signals; mA, Vdc,  Potentiometer, Pulse/u.  Accuracy �0.1%  3� Digital display : 1999  Easy to wire, screw type terminal  1/8 DIN standard (96 x 48mm)  High stability & low cost

CSR-321
Process Meter for display of mA mV VDC and Potentiometer signals, 0-19999 display, CSR421, CSR-421, digital display

For full specification Click Here

4� Digit process meter  Measuring Process Signals mA, Vdc,  Potentiometer, Pulse/u.  Accuracy �0.04%  4� Digital display: 19999  Easy to wire, screw type terminal  1/8 DIN standard (96 x 48mm)  High stability & low cost

CSR-421
Display Meter with Relay Outputs, 4 Digit 0-19999 display, CSS40, CSS-40, digital display

For full specification Click Here

Relay output trip meters 4 digit type (9999) A Din 96x48mm digital panel meter available in a 4 digit option with either one or two relay setpoint outputs. If one output is ordered this can be designated as a Low or High output in the ordering and in the case of two relay outputs Low/Low, High/High, High/Low. Also an extra output is provided as a Go output. This meter combines the traditional but popular user friendly front panel thumbwheel type push button switches to set the setpoints with the latest microprocessor technology.

CSS-40
Display Meter with Relay Outputs 4.5 Digit 0-19999 display, CSS41, CSS-41, digital display

For full specification Click Here

Relay output trip meter 4� digit type (19999) A Din 96x48mm digital panel meter available in a 4� digit option with either one or two relay setpoint outputs. If one output is ordered this can be designated as a Low or High output in the ordering and in the case of two relay outputs Low/Low, High/High, High/Low. Also an extra output is provided as a Go output. This meter combines the traditional but popular user friendly front panel thumbwheel type push button switches to set the setpoints with the latest microprocessor technology.

CSS-41
Display Meter with Relay Outputs, 5 Digit 0-99999 display, CSS50, CSS-50, digital display

For full specification Click Here

Relay output trip meters 5 digit type (99999) A Din 96x48mm digital panel meter available in a 5 digit option with either one or two relay setpoint outputs. If one output is ordered this can be designated as a Low or High output in the ordering and in the case of two relay outputs Low/Low, High/High, High/Low. Also an extra output is provided as a Go output. This meter combines the traditional but popular user friendly front panel thumbwheel type push button switches to set the setpoints with the latest microprocessor technology.

CSS-50
6 Channel Temperature Display Meter, CST321M, CST-321M, digital display

For full specification Click Here

3½ Digit six channel temperature meter  Measuring T/C: K,J,T,E,R RTD: PT100  Accuracy T/C:½0.25%, RTD:½0.1%  3½ Digit display : 1999  Easy to wire, screw type terminal  DIN standard (96x48mm)  High stability & low cost

CST-321M
DC Shunts, UA-SHT

For full specification Click Here

TYPE A  Primary current 10 Amps to 200 Amps TYPE B  Primary current 200 Amps to 600 Amps TYPE C  Primary current 800 Amps to 2000 Amps TYPE D  Primary current 3000 Amps to 5000 Amps ALL TYPES  Standard accuracy �-1% (0.5% & 0.25% on request)  Specify with model the secondary: 50mV, 60mV 75mV, 100mV

DC Shunts
cos, Power Meter with Relay and Signal Outputs, Digital Power Factor Meter, MPF5, MPF-5, digital display

For full specification Click Here

4½ Digit power meter with relay outputs, analogue signal output, RS485 Din 96x48mm digital single parameter power meters either as Watts, VAR or Power Factor. The meters can be specified for both single and three phase systems, 3 or 4 wire and are suitable for both balanced and unbalanced loads. The meters can be specified as a "display only" meter, or with a choice of one or two outputs. One relay or two relays that can be specified as latched or non latched, or an isolated analogue output with or without one relay output. Or with, or without RS485 MODBUS RTU which can also be with or without one relay output. The meter utilises the latest microprocessor technology in both the setting and operation of the meter.

MPF-5 (COS)
VAR, Power Meter with Relay and Signal Outputs, Digital VAR Meter, MQ5, MQ-5, digital display

For full specification Click Here

4½ Digit power meter with relay outputs, analogue signal output, RS485 Din 96x48mm digital single parameter power meters either as Watts, VAR or Power Factor. The meters can be specified for both single and three phase systems, 3 or 4 wire and are suitable for both balanced and unbalanced loads. The meters can be specified as a "display only" meter, or with a choice of one or two outputs. One relay or two relays that can be specified as latched or non latched, or an isolated analogue output with or without one relay output. Or with, or without RS485 MODBUS RTU which can also be with or without one relay output. The meter utilises the latest microprocessor technology in both the setting and operation of the meter.

MQ-5 (VAR)
Power Meter with Relay and Signal Outputs, Digital Watt Meter, MW-5, MW5, digital display

For full specification Click Here

4½ Digit power meter with relay outputs, analogue signal output, RS485 Din 96x48mm digital single parameter power meters either as Watts, VAR or Power Factor. The meters can be specified for both single and three phase systems, 3 or 4 wire and are suitable for both balanced and unbalanced loads. The meters can be specified as a "display only" meter, or with a choice of one or two outputs. One relay or two relays that can be specified as latched or non latched, or an isolated analogue output with or without one relay output. Or with, or without RS485 MODBUS RTU which can also be with or without one relay output. The meter utilises the latest microprocessor technology in both the setting and operation of the meter.

MW-5 (WATT)
DC Multi Display Power Meter, VAW, digital display, rs485

For full specification Click Here

DC Multi display power meter with relay outputs, analogue signal output, RS485 A Din 96x48mm multi display DC power meter. Measuring, displaying and communicating DC voltage, current, instantaneous power (Watts/KW), import and export Wh/KWh along with hours run. The voltage, current and power parameters also have max and min value recording during power on. The meter has the possibility for specifying up to 4 relay outputs including pulse outputs. The relays can be determined as set points for any of the parameters either low or high. In addition an analogue output also can be requested which can be assigned to any of the instantaneous measured parameters. Lastly, along with all the above mentioned outputs, RS485 MODBUS RTU communications can also be specified. The VAW meter is particularly suitable for solar energy and wind energy systems, along with electroplating, battery and transport applications. A particular feature of this meter which is especially relevant in "green energy" applications, is that after a certain time of no operator interaction with the meter, the meter enters a "switch down" mode and reduces the power to the LEDs, thus saving money.

VAW