Your Search returned 9 Results In 0.002 seconds
KWh meters CUBE 300 , CUBE-300, MODBUS, DUAL TARIFF,

For full specification Click Here

A Din 96mm digital KWh meter with a pulse output for interfacing with BMS systems. The CUBE 300 is suitable for single phase and three phase loads, both 3 wire and 4 wire balanced or unbalanced. The meter is designed to measure accurately all types of loads inductive or resistive and electronically controlled loads. The CUBE 300 benifits from fully isolated current inputs and to aid commissioning the meter can also display instantaneous KW for 60 seconds before reverting back to KWh. A high speed internal RS485 MODBUS communications option allows all readings to be given remotely. Also available is a Dual Tariff option giving two registers, tariff changeover is effected by an external input signal. NOTE: the CUBE 300 is available in standard execution ie, 400/415V L-L and 230VAC aux supply with 5Amp CT inputs. Non standard input voltages such as 110V L-L and 1Amp CT inputs are only available for large quantities. For smaller quantities please use the KWH CUBE.

CUBE 300
Multifunction metering Cube 350, cube350, cube-350/485, KWh, volts, amps, power factor, KW, KVArh, frequency, Modbus, Harmonics, RS485

For full specification Click Here

A Din 96mm digital electronic multifunction energy meter with dual pulse outputs as standard for interfacing with BMS systems. The CUBE 350 is equally suitable for single phase and three phase loads, both 3 wire or 4 wire balanced or unbalanced. The meter is designed to measure accurately all types of loads inductive or resistive and electronically controlled loads. The CUBE 350 benefits from fully isolated current inputs and to aid commissioning the meter also has fitted three "phase indicator lights" on the front of the meter. A high speed internal RS485 MODBUS communications option allows all displayed information plus additional information (see specifications below) to be read remotely. Also available is a Harmonics option, this information is obtained via the RS485 MODBUS. NOTE, the CUBE 350 is available in standard executions ie, 400/415V L-L and 230VAC aux supply with 5Amp CT inputs. Non standard input voltages such as 100V L-L and 1Amp CT inputs are only available for large quantities. For smaller quantities please use the MULTICUBE range.

CUBE 350
Multifunction metering CUBE 400, CUBE-400, volst, amps, power factor, kw, Kwh, KVar , frequency, Peak, export, Modbus, harmonics, RS485

For full specification Click Here

A Din 96mm digital three line backlit display electronic multifunction energy meter with dual pulse outputs as standard for interfacing with BMS systems. The CUBE 400 is equally suitable for single phase and three phase loads, both 3 wire or 4 wire balanced or unbalanced. The meter is designed to measure accurately all types of loads inductive or resistive and electronically controlled loads. As standard the meter also reads KWh, KVAh, KVArh as import and KWh & kVArh as export. The CUBE 400 benefits from fully isolated current inputs. A high speed internal R8485 MODBUS communications option allows all displayed information to be read remotely. Also available is a Harmonics option this is available both on the standard meter or with the RS485 MODBUS option. NOTE: the CUBE 400 is available in standard executions ie, 400 / 415V L-L and 230VAC aux supply with 5Amp CT inputs. Non standard input voltages such as 110V L-L and 110VAC auxiliary supplies, plus 1Amp CT inputs are only available for large quantities. For smaller quantities please use the MULTICUBE range.

CUBE 400
MID, kwh, Direct Connected KWHr meters, EEM12-32A, EEM, EEM34-3x65A, EEM34D, EM34D

For full specification Click Here

 Features  Din Rail Mounting  Suitable for Consumer Unit Mounting  3 Phase & 1 Phase Versions  Direct Connected no CTs Required  Most Units with Pulse Output

Direct Connected KWhr meters
KWh meters KWH CUBE, KWhr Cube, KWH-CUBE, ND

For full specification Click Here
A Din 96mm digital KWh meter with pulse output for interfacing with BMS systems. One unit suitable for both single phase and three phase 3 wire or 4 wire loads, balanced or un-balanced. The meter benefits from fully isolated current inputs and to aid commissioning instantaneous KW can be displayed to confirm the load to be measured. The meter not only being in the popular Din 96mm size is only 71mm deep. Utilising the latest backlit display technology affords excellent viewing visibility.
KWH-CUBE
KWh meters M600, KWh, KWh meter

For full specification Click Here
A Din 96mm KWh meter that is designed to compliment standard panel instruments. Available in both single phase, three phase balanced or unbalanced, 3 wire or 4 wire configuration. Also available is a DC KWh meter option, meter type EL96GT. All meters can be supplied with or without volt free relay pulse output, standard pulse rate 1 pulse per KWh (other pulse rates upon request). Front panel LED flashes every 0.1KWh. The counter is a 7 digit mechanical non resettable type.
M600
MID, kwh, Direct Connected KWHr meters, EEM12-32A, EEM, EEM34-3x65A, EEM34D, EM34D,  schell

For full specification Click Here

MID stands for �Measuring Instruments Directive" and is a new European Union directive to create a single market for measuring instruments across the EU and was effective from the 30th October 2006. The aim of the directive is to guarantee to users a standard European level of safety, reliability, tamper proofing and accuracy to instruments. For when meters are subjected to certain minimum specified levels of climatic conditions, mechanical environments and electromagnetic interference. "MID" is a replacement for the old UK "OFGEM" approval, also referred to sometimes as "OFFER" approval. It is advised that all electricity meters must be approved if used in a billing situation. This is a requirement of Schedule 7 of the Electricity Act 1989. Prior to the 30th October 2006 approval would have been granted by OFGEM. However, meters approved under previous UK provisions need not be certified in exempt situations. Usually landlord/tenant contracts, so long as a written agreement exists between the parties to dispense with the certification requirements. But any meter must still be of an approved design and be maintained in good working order. The new MID directive refers to ten categories of measuring instruments of which four relate to utility meters. In particular KWh meters fall within MI-003 ACTIVE ELECTRICAL ENERGY METERS.

MID KWh Meter
Multifunction metering multicube, multi-cube, multi cube,

For full specification Click Here

A DIN 96mm x 96mm LCD multi display meter and only 71mm deep available in six different permutations.  Features  One Meter Measures ALL your values. Economically replaces Ammeters, Voltmeters, Switches, PF & kW Indicators, kWh Meters etc.  Easy to See. Clear Backlit LCD Display with a Very Wide Viewing Angle  Easy to Use. Four Keys select all parameters  Safe to Use. Fully Isolated Current Inputs for Complete User & Installation Safety - Complies with the Low Voltage Directive (LVD)  Small in Size yet great in Performance. Needs Only 71mm behind the panel - Measures every single cycle up to the 20th Harmonic  Simple to Install. Software Detection/Correction of Wiring Errors

Multicube 950
Multifunction metering Powerrail 350, volts, amps, power factor, kw, kwh, kvar, peak, modbus, harmonics, rs485, pr350

For full specification Click Here

A Din rail mounted digital electronic multifunction energy meter with dual pulse outputs as standard for interfacing with BMS systems, the meter also is suitable for consumer unit mounting. The RAIL 350 is equally suitable for single phase and three phase loads, both 3 wire or 4 wire balanced or unbalanced. The meter is designed to measure accurately all types of loads inductive or resistive and electronically controlled loads. The POWER RAIL 350 benefits from fully isolated current inputs. A high speed internal RS485 MODBUS communications option allows all displayed information plus additional information to be read remotely. Also available is a Harmonics option this information is obtained via the RS485 MODBUS.

RAIL 350