IN LINE CURRENT PROVING SWITCH

“With delay to energise on a rising current”. The output relay delays to energise for up to 10 secs when the monitored current rises above the set level as selected by the front potentiometer. It will de-energise when the current falls below the set level less a fixed hysteresis of 1% against the set level. De-energisation will also occur if the auxiliary supply is lost.

The MOD-I can be used to monitor a 3 phase motor by passing one phase into terminal A1 and out on the relevant I.. terminal to the load. The panel Neutral needs to be connected to terminal A2 even if the load does not have a Neutral connection. All terminal details and information along with the CE mark is clearly marked on the sides of the housing.

Single range versions of the above product are available product type YRI-41.

Supply & Measuring:

Supply voltage: 220-240VAC

Max power consumption: 5VA

Insulation: 2.5Kv 50Hz impulse

Measurement ranges:
0.1-1A (terminal 1)
0.3-3A (terminal 2)
0.5-5A (terminal 3)
1-10A (terminal 4)

Max over current:
1A version / 2A for 1sec
3A version / 5A for 1sec
5A version / 8A for 1sec
10A version/ 15A for 1sec

Hysteresis: Nominal 1% fixed

Repeat accuracy: <±1%

Delay time: 1-10 secs

Relay outputs:

Output contacts: SPCO 16Amps/250V AC1

Mechanical life: 30 Million ops

Electrical life: 200K at 16A/250VAC

General:

Operating temperature: -20°C to +65°C

Storage temperature: -20°C to +65°C

Max cable size: 2.5mm

CE marked: Yes

In accordance with:
EN61000-6-1: 2007
EN61000-6-3: 2007
EN61010-1: 2002

Housing material: Polycarbonate, Auto extinguishable to UL 94 V-0