DIN 96x48mm DC AMPERE HOUR METER WITH RELAY OUTPUTS, ANALOGUE OUTPUT, RS485

Product

group

DD

CS2-TM

Features

  • Separate totalising display
  • Separate batch count display
  • 3 volt free control inputs
  • Up to 4 relay outputs
  • CE marked
  • Ideal product for electroplating applications
Download data sheet

A Din 96x48mm DC Ampere Hour meter, taking a current reference from a DC shunt and integrating this reference against time to achieve an Ampere Hour or Ampere Minute reading. There are two display screens, the main ten digit screen is the totaliser display, the other screen is a “Batch” programmable setting. The meter can be specified with up to four relay outputs (2C/O and 2N/O) which can be assigned at the time of ordering for many functions to control say an electroplating system. As an option RS485 MODBUS is also available. Three volt free control inputs are featured as standard for functions such as reset. Please discuss your exact requirements with our technical sales department.

Accuracy: ≤±0.4% of FS

DC current input: Via a 50mV, 60mV or 100mV shunt

Sampling rate: 15 cycles/Sec

Response time: ≤100mSec

Display: 7.1mm high LED’s, Top row 10 red digits, Bottom row 6 red digits

Status LED’s: 4 square LED’s to indicate outputs

Over-range indication: “ovFL” displayed when input is over 120% of input range

Under-range indication: “-ovFL" displayed when input is under -20% of input range

Power consumption: 5VA / 5W

Operating temperature: 0-60°C

Operating relative humidity: 20-95% RH

Temperature coefficient: ≤50 PPM/°C

Storage temperature: -10°C to +70°C

Dielectric strength: AC 2.0KV for 1 min between input, output/s, power & case

Protection: IP54

Latching: Optional please specify

Number of setpoints: Up to 4

Energisation functions:
Start delay
Energisation & de-energisation delay
Energisation latching
Hysteresis

Time delay programmable: 0-9 mins 59.9 secs

Relay contacts:
Relays1&4: 2xNO1A/230VAC, 3A/115VAC
Relays2&3: 2xCO1A/230VAC, 3A/115VAC

Protocol: MODBUS RTU

Baud rate programmable: 1200/2400/4800/9600/19200/ 38400

Data bits: 7 or 8 bit programmable

Parity programmable: Even, odd or none (with 1 or 2 stop bit)

Address programmable: 1-255 programmable

Distance: 1200 Metres

Terminal resistor: 150 Ohm at last unit

CS2-TM-FRONT-PANEL.png#asset:4171

CS2-TM-DIMENSIONS.png#asset:4170

CS2-TM-CONNECTION-DIAGRAM.png#asset:4169

The meter will be scaled and set exactly to your requirements

CS2-TM-ORDERING-INFORMATION2.png#asset:4259

* Regarding the relays, specify your exact requirements of relay configuration at the time of ordering, along with any extra functions such as latching or time delays.

Programming & set up buttons can be specified with “Visible Buttons” on the front panel or “Discrete Buttons” behind the front screen. If not specified, meter will be supplied with “Discrete Buttons”.

Recently Viewed Products

Keep Updated

Receive updates about our offers, latests products and more, directly to your inbox