DIN RAIL 8 & 11 PIN PLUG IN DEDICATED VOLTAGE, MAINS RESTORATION “BROWN OUT” RELAYS

Product

group

A

LYRAPTU, L8RAPTU, L11RAPTU (spco) & L8R2APTU, L11R2APTU (dpco)

Features

  • Din rail & plug in versions
  • SPCO & DPCO versions
  • Relay resets when voltage dips below 80% of Un
  • Fast response 20mSec detects 1 cycle loss of supply
  • Super fast response version 1mSec also available
  • Monitors is its own supply
  • Bi-colour LED indication
  • Ideal for water authority applications
  • CE marked
Download data sheet

Din rail mounted or 8 & 11 pin plug in SPCO and DPCO “mains restoration auto restart relays”. The voltage and supply sensing built into these units are designed to sense voltage dips and momentary loss of supply referred to as “Brown Outs”. This phenomena is a particular threat in the water industry and regularly occurs at remote pumping locations, especially during electrical storms. Left unchecked, a supply dip can “lock out” all or part of a control system, causing system malfunctions over a wide area necessitating engineers’ site visits, just to reset and restart a control system. By monitoring the supply these tried and proven Foxtam units will provide the “auto restart” signal to reset and restart the control system without the need for a site visit. For added convenience DPCO units are also available with the extra contact used as say a telemetry output to notify an operations centre that an incident has occurred.

These relays are designed to operate in such a way that they reset as quick, if not quicker, than standard contactor and relay coils.

On the application of the supply voltage the relay will energise after a fixed delay of 100mSec. Should the supply then be lost for 1 cycle (20mSec)* and/or dip below 80% of the nominal supply voltage, the relay will de-energise and will energise again after 100mSec when the supply voltage is restored.

*1mSec version also available on request.

Timing:

Repeat accuracy, constant ambient: ±0.5%

Repeat accuracy, across temp range: ±3%

Response time: Better than 20mSec, Better than 1mSec option on request

Supply voltage:

Supply voltage tolerance: -20% to +15%

Frequency: 50/60Hz or DC

Max power consumption: 10VA

Relay outputs:

Output contacts: 5Amps/250V AC1

Max switching voltage: 250VAC, 250VDC

Mechanical life: 20 Million ops

Electrical life: 50K ops at max rated load

General:

Operating temperature: -20°C to +65°C

Storage temperature: -20°C to +65°C

CE marked: Yes

In accordance with:
EN61000-6-1: 2007
EN61000-6-3: 2007
EN61010-1: 2002

RoHS compliant: Yes

Housing material: Polycarbonate, auto extinguishable according to UL94VO

TYPE

LYRAPTU (Din rail SPCO)
L8RAPTU (8 pin plug in SPCO)
L11RAPTU (11 pin plug in SPCO)
L8R2APTU (8 pin plug in DPCO)
L11R2APTU(11 pin plug in DPCO)

COIL VOLTAGE

12VDC
24V DC
48V DC
24V AC
48V AC
110V AC
230V AC

OPTION

1mSec (Request if required super fast reset)

LYRAPTU-Connections.png#asset:2880

Clasic-Din-Rail-Plug-in.png#asset:2854

Recently Viewed Products

Keep Updated

Receive updates about our offers, latests products and more, directly to your inbox