ISKRA14 PIN 4PCO, 5 AMP RATED RELAYS

Product

group

H

TRP3145/AC VOLTS, TRP3140/DC VOLTS

Features

  • LED indication
  • Flag indication
  • Test button
  • Locking facility
  • DC coils with integral diode protection
  • Optional gold plated contacts
  • CE marked
  • VDE approved
  • UL & CSA approved
Download data sheet

A high quality range of CE marked standard pin out 4PCO 14 pin plug in relays, nominally rated at 5 Amps/250VAC AC1. The relays benefit from every customer required option as standard, namely both mechanical and electrical indication via a mechanical flag and a high intensity LED. DC coil relays also have included within the relay a protection diode fitted across the coil as standard. The relays can be manually tested by a momentary action push button, a lever can then be twisted to give a locking facility. On request the relays are available with gold plated contacts 5 microns for long term assurance of low level signal switching (suffix part number GP). To differentiate between AC and DC coils in the same installation the push button is coloured red for AC coils and blue for DC coils. Coil voltages available are from 6VDC to 220VDC and 6VAC to 230VAC. Clearly marked on the relay case are the connection details and the CE mark.

IMPORTANT NOTE: With regards coil connection on DC coil relays which have both a protection diode and LED fitted as standard, coil polarity matters (+A1, 13) (-A2, 14).

TRP3145-Coil-Data.png#asset:3466

Rated Power Pull In Max:
DC1W
AC 1.2VA

Rated Power in Operation:
DC 0.6W
AC 0.7VA

Max Coil Temperature: 155°C

Test voltage(1min.) contact-coil: ≥ 2kVrms' 50Hz

Contact-contact: ≥1kVrms' 50Hz

Between-contact 4CO: ≥ 1kVrms' 50Hz

Operate time at Un: ≤ 15 ms

Release time: ≤ 14 ms

Bounce time: ≤ 5 ms

Insulation resistance (500VDC): 10 MΩ

Vibration resistance (10-55Hz): 3 gn

Shock resistance (11 ms) functional: 20 gn

Shock resistance (11 ms) destructive: 100 gn

Ambient temperature for operating: -25ºC to + 60ºC

Ambient temperature for storage: -40ºC to + 85ºC

Protection degree: IP 50, IEC 529

Mounting position: As desired

Relay weight: 35g

Contact form: 4PCO

Contact material:
AgCd010
5 microns Gold plated contacts available on request

Rated current: 5A

Max. switch-on current (4 s, 10% duty cycle): 10A

Max. operating voltage: 250VAC, VDC

Max. switching power: 1250VA 200W

Min switching load: 6VDC, 100mA

Contact resistance: ≤100mW

Max. operating: 1200 operat./h at rated load (4 CO)

Frequency: 30000 operat./h at min. load

Mechanical life: > 2 x 107 operations

Electrical life: see graphs

TYPE

TRP3145

COIL VOLTAGE

6VAC
12VAC
24VAC
48VAC
60VAC
110VAC
230VAC

TYPE

TRP3140

COIL VOLTAGE

6VDC
12VDC
24VDC
48VDC
60VDC
110VDC
220VDC

ADD SUFFIX “GP” AFTER PART NUMBER FOR GOLD PLATED CONTACTS

SOCKETS

PYF-14AEW
MHO (PYF-14AEW retaining clip)
PYF-14BE PYF-14BE/3
MS35 (PYF-14BE & PYF-14BE/3 retaining clip)

TRP3145-Dimensions.png#asset:3467

TRP3145-Graphs.png#asset:3468

Recently Viewed Products

Keep Updated

Receive updates about our offers, latests products and more, directly to your inbox