Product
group
F
A conveniently packaged Din rail mounted AC voltage to an adjustable 0-10VDC output module. Designed specifically for “HAND / OFF / AUTO” applications for BMS controller inputs, when in “HAND” a DC voltage needs to be forced into BMS input cards, but not necessarily a full 10VDC signal is required. This product can be specified with either a 24VAC, 24VDC, 110VAC or 230VAC primary voltage, the output voltage is an adjustable 0-10VDC via a remote 22.5mm panel mounted potentiometer. The remote potentiometer is supplied along with 3 metres of 1.5mm two core cable as a matched and calibrated kit with the output module. It is important that the integrity of the cable length is maintained and not shortened, also to maintain maximum accuracy each individual module and pot are supplied as a calibrated matched pair and are therefore are not interchangeable. A healthy AC input voltage is signalled by an illuminated green LED, and the output voltage is indicated by an increasing in intensity illuminated red LED starting at 1VDC (below 1VDC the output will be present, but without LED indication). Note this product is not designed to power “control circuits”, it is only for driving into BMS input cards, max 10mA @ 10VDC.
Input Supply
Nominal Input: 24VAC, 24VDC, 110VAC, 230VAC
Output Voltage Range: 0-10VDC Via Remote Potentiometer
Min Impedance: 1K Ohm
Max Impedance: Infinity Ohms
Max Output Load: 10mA
AC Supply Healthy: Via Green LED
DC Output Healthy: Via Red LED, variable intensity 1-10VDC
Output Voltage Regulation: <0.5%
General
Operating Temperature: -20°C to +65°C
Storage Temperature: -20°C to +65°C
Humidity: 95% Rel H max
Isolation Voltage I/P-O/P: 1500VDCfor 1 min
CE marked: Yes
In accordance with:
EN61000-6-1: 2007
EN61000-6-3: 2007
EN61010-1: 2002
Housing material: Polycarbonate, Auto extinguishable to UL 94 V-0
RoHS Compliant: Yes
TYPE
Y24D0-10DRP (24VDC)
Y24A0-10DRP (24VAC)
Y110A0-10DRP (110VAC)
Y230A0-10DRP (230VAC)
Receive updates about our offers, latests products and more, directly to your inbox