Product
group
A
Simple din rail mounted or 8 & 11 pin plug in dedicated delay off via a trailing edge trigger input timers, with dedicated coil voltage and time range. These timers are ideal for mass production of OEM applications, or for any application where operator interference must be kept to a minimum. These timers can also on request, subject to a minimum quantity of 10 pieces, be factory set with an exact time, thus ensuring absolutely no operator interference. The timers feature a red LED to indicate relay output status. All terminal details along with the CE mark is clearly marked on the sides of the housing.
A permanent supply is required at all times on to the coil terminals, however this is not the controlling factor. The controlling factor is a trigger input S2, on S2 closing the relay contacts energise, on removal of S2 (trailing edge) the relay contacts time to de-energise. If S2 is reinstated after timing has commenced, it will immediately cancel any remaining time delay and S2 will need to be removed for timing to commence again. If the coil supply is removed at any point when the relay contacts are energised, irrespective of what state the trigger is at, the relay contacts will de-energise. If S2 is closed before the connection of the coil supply, on the connection of the coil supply the relay contacts will immediately energise and on the opening of S2 timing will commence.
The command contact S2 should be isolated from other circuits and must only be connected to the same supply as the coil voltage to the timer. If this cannot be achieved, use UNI-1C or UNI-4C or 8/11 pin plug in units.
Timing:
Repeat accuracy, constant ambient: ±0.5% of set value
Repeat accuracy, across temp range: ±3%
Setting accuracy: 0 to +30%
Reset time, during timing: 50mSec
Trigger input (S2):
Max power consumption: 5mA
Min input time: 25mSec
Max input time: Continuous
Relay outputs:
Output contacts:
SPCO units 10Amps/250V AC1
DPCO units 8Amps/250V AC1
Max switching voltage: 250VAC, 30VDC
Mechanical life: 20 Million ops
Electrical life: 50K ops at max rated load
Supply voltage:
Supply voltage: ±15%
Frequency: 50/60Hz
Max power consumption: 10VA
General:
Operating temperature: -20°C to +65°C
Storage temperature: -20°C to +65°C
CE marked: Yes
In accordance with:
EN61000-6-1: 2007
EN61000-6-3: 2007
EN61010-1: 2002
Housing material: Polycarbonate, Auto extinguishable to UL 94 V-0
TYPE
YRCF (Din rail SPCO)
8RCF (8 pin plug in SPCO)
11RHF (11 pin plug in SPCO)
11RCF (11 pin plug in SPCO)
11R2CF (11 pin plug in DPCO)
TIME RANGE
0.1 to 1 sec
0.3 to 3 sec
0.6 to 10 sec
0.3 to 30 sec
0.6 to 60 sec
1 to 100 sec
3 to 300 sec
0.1 to 10 mins
0.2 to 20 mins
0.3 to 30 mins
0.6 to 60 mins
1 to 100 mins
COIL VOLTAGE
12V DC
24V AC/DC
48V AC/DC
110V AC
230V AC
Factory preset version remove “F” from type code and insert “P”, then specify exact fixed time required
Receive updates about our offers, latests products and more, directly to your inbox