Product
group
A
Din rail mounted or 8 & 11 pin plug in SPCO and DPCO “mains restoration auto restart timers”. The voltage and supply sensing built into these units are designed to sense voltage dips and momentary loss of supply referred to as “Brown Outs”. This phenomena is a particular threat in the water industry and regularly occurs at remote pumping locations, especially during electrical storms. Left unchecked, a supply dip can “lock out” all or part of a control system, causing system malfunctions over a wide area necessitating engineers’ site visits, just to reset and restart a control system. By monitoring the supply these tried and proven Foxtam units will provide the “auto restart” signal to reset and restart the control system without the need for a site visit. For added convenience DPCO units are also available with the extra contact used as say a telemetry output to notify an operations centre that an incident has occurred.
These timers are designed and operate in such a way that they reset as quick, if not quicker, than standard contactor and relay coils. They are offered in a choice of three functions:
Delay On “A” function - on the application of the supply voltage the relay will energise after the set time delay. Should the supply then be lost for 1 cycle (20mSec)* and/or dip below 80% of the nominal supply voltage, the relay will de-energise and will commence timing again when the supply voltage is restored.
Pulse “H” function - on the application of the supply voltage the relay will energise for the set delay time and then deenergise. The timer will then remain de-energised until reset by switching off normally, or by the loss of the supply for 1 cycle (20mSec)* and/or dip below 80% of the nominal supply voltage. The relay will again energise for the set delay time on restoration of a healthy supply voltage.
Delayed Pulse “Q” function - on the application of the supply voltage the relay will after the set delay time pulse on for a fixed time of 300mSec. Should the supply be lost for 1 cycle (20mSec)* and/or dip below 80% of the nominal supply voltage the timer will be reset and after restoration of the supply the timer will commence another set delay time after which the relay will energise for 300mSec.
*1mSec version also available on request.
Timing:
Repeat accuracy, constant ambient: ±0.5% of set value
Repeat accuracy, across temp range: ±3%
Setting accuracy: 0 to +30%
Response time: Better than 20mSec, Better than 1mSec option on request
Supply voltage:
Supply voltage tolerance: -20% to +15%
Frequency: 50/60Hz
Max power consumption: 10VA
Relay outputs:
Output contacts:
“Q & A” SPCO units 5Amps/250V AC1
“H” SPCO units 10Amps/250V AC1
All DPCO units 8Amps/250V AC1
Max switching voltage: 250VAC, 250VDC
Mechanical life: 20 Million ops
Electrical life: 50K ops at max rated load
General:
Operating temperature: -20°C to +65°C
Storage temperature: -20°C to +65°C
CE marked: Yes
In accordance with: EN61000-6-1: 2007, EN61000-6-3: 2007, EN61010-1: 2002
Housing material: Polycarbonate, Auto extinguishable to UL 94 V-0
DELAY ON
TYPE
LYRAFTU (Din rail SPCO)
L8RAFTU (8 pin plug in SPCO)
L11RAFTU (11 pin plug in SPCO)
L8R2AFTU (8 pin plug in DPCO)
L11R2AFTU (11 pin plug in DPCO)
PULSE
TYPE
LYRHFTU (Din rail SPCO)
L8RHFTU (8 pin plug in SPCO)
L11RHFTU (11 pin plug in SPCO)
L8R2HFTU (8 pin plug in DPCO)
L11R2HFTU (11 pin plug in DPCO)
DELAYED PULSE
TYPE
LYRQFTU (Din rail SPCO)
L8RQFTU (8 pin plug in SPCO)
L11RQFTU (11 pin plug in SPCO)
L8R2QFTU (8 pin plug in DPCO)
L11R2QFTU (11 pin plug in DPCO)
TIME RANGE (specify)
0.1 to 1 sec
0.1 to 3 sec
0.1 to 10 sec
0.3 to 30 sec
0.6 to 60 sec
1 to 100 sec
3 to 300 sec
0.1 to 10 mins
0.2 to 20 mins
0.3 to 30 mins
0.6 to 60 mins
1 to 100 mins
COIL VOLTAGE
12VDC
24V DC
48V DC
24V AC
48V AC
110V AC
230V AC
OPTION
1mSec (Request if required super fast reset)
Receive updates about our offers, latests products and more, directly to your inbox