DIN RAIL, 8 & 11 PIN PLUG IN, IN SERIES THYRISTOR / TRIAC DELAY ON TIMERS

Din rail mounted or 8 & 11 pin plug in, in series thyristor / triac delay on timers. Operates on any supply from 20- 260V AC/DC and is connected in series with the load. For these timers to operate there must be a load of at least 5mA, they cannot be used for “volt free” control. These timers are available in a choice of one of three multi time ranges, single time ranges or as a fixed time setting. The timers feature a red LED to indicate output status. All terminal details along with the CE mark is clearly marked on the sides of the housing.

The function is initiated by a supply on terminals 15 & 18 or pins 1 & 3 which commences the timing. The output will then switch after the timing period. Removal of the supply after timing has been completed and the output will open, if removal of the supply is before timing has been completed the remaining time will be cancelled.

Timing:

Repeat accuracy, constant ambient: ±0.5% of set value

Repeat accuracy, across temp range: ±3%

Reset time, during timing: 100mSec

Reset time, after timing: 25mSec

Output:

Output rating Imax: 0.7Amps continuous (20°C)

Peak current: 20Amps <10mSec

Output rating Imin: 5mA

Leakage during timing: 5mA max (can cause buzzing during timing)

Voltage drop after timing: 3.5V

Transient protection: 1400V for 100uSec

Supply voltage:

Supply voltage: 20-260V AC/DC (on request 10-130V AC/DC)

General:

Operating temperature: -20°C to +65°C

Storage temperature: -20°C to +65°C

CE marked: Yes

In accordance with:
EN61000-6-1: 2007
EN61000-6-3: 2007
EN61010-1: 2002

Housing material: Polycarbonate, Auto extinguishable to UL 94 V-0

TYPE

YSA (Din rail)
8SA (8 pin plug in)
11SA (11 pin plug in)

TIME RANGE
(specify F then time range, or P and factory set time, or S, M or L multi range version)

S (0.06 to 160 secs)
0.06 to 0.6 sec
0.25 to 2.5 sec
2 to 20 sec
16 to 160 sec

M (0.5 sec to 21 mins)
0.5 to 5 sec
2 to 20 sec
16 to 160 sec
2 to 21 mins

L (15 sec to 640 mins)
15 to 150 sec
1 to 10 mins
8 to 80 mins
64 to 640 mins

F
0.1 to 1 sec
0.1 to 3 sec
0.1 to 10 sec
0.3 to 30 sec
0.6 to 60 sec
1 to 100 sec
3 to 300 sec
0.1 to 10 mins
0.2 to 20 mins
0.3 to 30 mins
0.6 to 60 mins
1 to 100 mins

P
Then specify factory fixed time required, max 10 mins