VOLTAGE SURGE ARRESTERS FOR "FLOATING" LOW CURRENT DC POWER SUPPLIES & SYSTEMS Imax 20KA 8/20

Product

group

HH

PSC-2

Features

  • Wired in series, maximum 4 Amps
  • Suitable for floating DC systems
  • Suitable for low power supply and telecommunication applications
  • No fusing required
  • Width only 12mm
Download data sheet

These units are designed to protect small 12, 24 and 48VDC floating power supplies and systems and are wired in series, maximum system load 4 Amps. Protection is via MOV’s, the plug in module facilitates the replacement of a failed MOV without the need to disconnect the system wiring and as it is in parallel across the system, failure or removal of the module does not interrupt the system voltage.

Complies with: IEC / EN61643-21

Category: C1 / C2 / C3

Maximum in series current rating: 4 Amps

C2 Nominal discharge current 8/20: 10KA

Maximum discharge current 8/20: 20KA

Protection via: High energy MOV’s (Metal Oxide Varistors)

Response time: <1n Sec

Thermal protection: Yes

Operating temperature range: -40°C to +80°C

Terminal cross section: 4mm² stranded cable

PSC-2-table.png#asset:3117


Type

PSC-2/12VDC (7086.83)
PSC-2/24VDC (7086.84)
PSC-2/48VDC (7086.85)

Spare Modules

12VDC (7086.86)
24VDC (7086.87)
48VDC (7086.88)

PSC-2-Dimensions-Config.png#asset:3118

Recently Viewed Products

Keep Updated

Receive updates about our offers, latests products and more, directly to your inbox