AC / DC "CT" STYLE RS485 MODBUS RTU OUTPUT ENERGY METER (additional information)

Example : if you want to set the measured range from 0...300 A AC/DC to 0... 150A AC/DC, switch ON the dip-switch n°8 and switch ON also one of the first four dipswitches (if you don’t do that it will continue to take the EEPROM setting).

If you want to change from uni-polar (default) to bi-polar function by dip-switch, switch ON the dip n°7 and switch ON also one of the first dip-switches (if you don’t do that it will continue to take the EEPROM setting).

Any changes made by the dip-switches it is required to switch off the power supply. It’s a safety condition in order to prevent any damage to the device.

To enable programming, setup and configuration the following two free software downloads are available from www.qeed.it (section products/download software). Java required.

Software Download Product Type

FACILE-QI-50-V-485 for :-
QI-50-V-485
QI-300-V-485

FACILE-QI-POWER-485 for :-
All QI-POWER-xxx variants

EN61000-6-4/2006 + A1 2011
EN64000-6-2/2005
EN61010-1/2010
EN55022: 2010-12
EN55024: 2010-11
EN61000-6-4/2006 + A1 2011
EN64000-6-2/2005
EN61010-1/2010

CE Marked and UL pending on (some types)