Product
group
DD
Miniature Din 48x24mm 5 digit panel meters, available with a wide choice of DC analogue voltage and current signal inputs, along with potentiometer and resistance inputs. These meters can be specified with one or two relay outputs, plus if required an analogue output or RS485 MODBUS RTU. An excitation supply of 24VDC max 30mA is featured as standard on the CS3-PR version. These meters utilise the latest microprocessor technology in both the setting and operation of the meter.
Programming & set up buttons can be specified with “Visible Buttons” on the front panel or “Discrete Buttons” behind the front screen. If not specified, meter will be supplied with “Discrete Buttons”
Relay programmable:
Low
Low-Low
High
High-High
Low-High
Latching: Optional please specify
Number of setpoints: 1 or 2
Energisation functions:
Start delay
Energisation & De-energisation delay
Energisation latching
Hysteresis
Time delay programmable: 0-9 mins 59.9 secs
Hysteresis programmable: 0-5000 counts
Relay contacts: 2 x NO: 1A/230VAC, 3A/115VAC
Accuracy: ≤±0.1% of FS
Ripple: ≤±0.1% of FS
Response time: ≤ 100 mSec (10-90% of input)
Output capability:
Voltage 1000 Ohm
Current into 600 Ohm max
Protocol: MODBUS RTU
Baud rate programmable: 1200 / 2400 / 4800 / 9600 / 19200 / 38400
Data bits: 8 bit programmable
Parity programmable: Even, odd or none (with 1 or 2 stop bit)
Address programmable: 1-255 programmable
Distance: 1200 Metres
Terminal resistor: 150 Ohm at last unit
The meter will be scaled and set exactly to your requirements
Programming & set up buttons can be specified with “Visible Buttons” on the front panel or “Discrete Buttons” behind the front screen. If not specified, meter will be supplied with “Discrete Buttons”.
Receive updates about our offers, latests products and more, directly to your inbox